The table below lists every trim of the 1999 Land Rover Discovery with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

Configuration Engine HP Torque Axle Tow (lb) GVWR Curb Payload
SD 4dr All-wheel Drive 182 233 1,650 6,019 4,465 1,554
Series II 4dr All-wheel Drive 188 250 1,653 6,064 4,576 1,488

How to interpret the headline tow figure

Tow ratings at this level are normally achievable with a conventional Class II or Class III receiver hitch. Always verify your vehicle has the manufacturer's tow package installed if you intend to tow at the upper end of the rating, and inspect the door-jamb sticker for the actual maximum permitted on your specific configuration.

How this year compares to 1998

The 1998 Land Rover Discovery carried a maximum tow rating of 7,700 lb. The 1999 model is rated 6,047 lb lower — sometimes a real spec change, sometimes a re-test under a stricter standard like SAE J2807. See the 1998 Land Rover Discovery page for the full per-trim breakdown of the prior year.

Other 1999 Land Rover models

The rest of Land Rover's 1999 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.