2007 Mercury Mountaineer 2WD towing capacity

The 2007 Mercury Mountaineer 2WD is published in 2 configurations, with tow ratings ranging from 5,290 to 7,220 lb depending on cab, bed, drivetrain, and hitch class. The peak figure (7,220 lb) sits in mid-size SUV / pickup territory.

The table below lists every trim of the 2007 Mercury Mountaineer 2WD with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

How to interpret the headline tow figure

Tow ratings at this level are normally achievable with a conventional Class II or Class III receiver hitch. Always verify your vehicle has the manufacturer's tow package installed if you intend to tow at the upper end of the rating, and inspect the door-jamb sticker for the actual maximum permitted on your specific configuration.

How this year compares to 2005

The 2005 Mercury Mountaineer 2WD carried a maximum tow rating of 7,040 lb. The 2007 model adds 180 lb on top of that — usually a sign the manufacturer added a tow package option, refreshed the powertrain, or revised hitch class certification. See the 2005 Mercury Mountaineer 2WD page for the full per-trim breakdown of the prior year.

Other 2007 Mercury models

The rest of Mercury's 2007 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

Notes

• Factory towing package required
• Factory towing package required

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.