2010 Chevrolet-GMC Yukon XL Denali 2WD towing capacity
The 2010 Chevrolet-GMC Yukon XL Denali 2WD is published in one configuration with a tow rating of 7,600 lb (full-size truck and SUV territory).
The table below lists every trim of the 2010 Chevrolet-GMC Yukon XL Denali 2WD with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.
Per-trim breakdown
| Configuration | Engine | HP | Torque | Axle | Tow (lb) | GVWR | Curb | Payload |
|---|---|---|---|---|---|---|---|---|
| 6.2L V8 | 6.2L V8 | — | — | — | 7,600 | — | — | — |
How to interpret the headline tow figure
Tow ratings at this level are normally achievable with a conventional Class II or Class III receiver hitch. Always verify your vehicle has the manufacturer's tow package installed if you intend to tow at the upper end of the rating, and inspect the door-jamb sticker for the actual maximum permitted on your specific configuration.
Other 2010 Chevrolet-GMC models
The rest of Chevrolet-GMC's 2010 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.
All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.