2011 Toyota Tacoma Double CAB towing capacity

The 2011 Toyota Tacoma Double CAB is published in 4 configurations, with tow ratings ranging from 6,300 to 6,400 lb depending on cab, bed, drivetrain, and hitch class. The peak figure (6,400 lb) sits in mid-size SUV / pickup territory.

The table below lists every trim of the 2011 Toyota Tacoma Double CAB with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

How to interpret the headline tow figure

Tow ratings at this level are normally achievable with a conventional Class II or Class III receiver hitch. Always verify your vehicle has the manufacturer's tow package installed if you intend to tow at the upper end of the rating, and inspect the door-jamb sticker for the actual maximum permitted on your specific configuration.

How this year compares to 2010

The 2010 Toyota Tacoma Double CAB carried a maximum tow rating of 6,500 lb. The 2011 model is rated 100 lb lower — sometimes a real spec change, sometimes a re-test under a stricter standard like SAE J2807. See the 2010 Toyota Tacoma Double CAB page for the full per-trim breakdown of the prior year.

Other 2011 Toyota models

The rest of Toyota's 2011 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.