The table below lists every trim of the 2012 Hyundai Veracruz (all) with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

Configuration Engine HP Torque Axle Tow (lb) GVWR Curb Payload
3.8L V-6 3.8L V-6 3,500

How to interpret the headline tow figure

Tow ratings at this level are normally achievable with a conventional Class II or Class III receiver hitch. Always verify your vehicle has the manufacturer's tow package installed if you intend to tow at the upper end of the rating, and inspect the door-jamb sticker for the actual maximum permitted on your specific configuration.

How this year compares to 2010

The 2010 Hyundai Veracruz (all) carried a maximum tow rating of 3,500 lb. The 2012 model carries the same headline figure — manufacturers usually leave the rating alone year-over-year unless there's a powertrain or hitch change. See the 2010 Hyundai Veracruz (all) page for the full per-trim breakdown of the prior year.

Other 2012 Hyundai models

The rest of Hyundai's 2012 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

Model Max tow (lb)
2012 Hyundai Santa FE 3,500
2012 Hyundai Tucson 2,000

Notes

  • Towing package required

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.