1992 Chrysler Town & Country towing capacity

The 1992 Chrysler Town & Country is published in one configuration with a tow rating of 2,250 lb (light utility / small-trailer territory).

The table below lists every trim of the 1992 Chrysler Town & Country with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

How to interpret the headline tow figure

Tow ratings at this level are normally achievable with a conventional Class II or Class III receiver hitch. Always verify your vehicle has the manufacturer's tow package installed if you intend to tow at the upper end of the rating, and inspect the door-jamb sticker for the actual maximum permitted on your specific configuration.

How this year compares to 1991

The 1991 Chrysler Town & Country carried a maximum tow rating of 2,250 lb. The 1992 model carries the same headline figure — manufacturers usually leave the rating alone year-over-year unless there's a powertrain or hitch change. See the 1991 Chrysler Town & Country page for the full per-trim breakdown of the prior year.

Other 1992 Chrysler models

The rest of Chrysler's 1992 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.