2006 Mercury Mountaineer towing capacity

The 2006 Mercury Mountaineer is published in 2 configurations with a tow rating of 3,500 lb (compact SUV / minivan territory).

The table below lists every trim of the 2006 Mercury Mountaineer with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

How to interpret the headline tow figure

Tow ratings at this level are normally achievable with a conventional Class II or Class III receiver hitch. Always verify your vehicle has the manufacturer's tow package installed if you intend to tow at the upper end of the rating, and inspect the door-jamb sticker for the actual maximum permitted on your specific configuration.

How this year compares to 2005

The 2005 Mercury Mountaineer carried a maximum tow rating of 6,900 lb. The 2006 model is rated 3,400 lb lower — sometimes a real spec change, sometimes a re-test under a stricter standard like SAE J2807. See the 2005 Mercury Mountaineer page for the full per-trim breakdown of the prior year.

Other 2006 Mercury models

The rest of Mercury's 2006 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.