2010 Toyota Tundra Regular CAB towing capacity

The 2010 Toyota Tundra Regular CAB is published in 2 configurations, with tow ratings ranging from 5,100 to 10,100 lb depending on cab, bed, drivetrain, and hitch class. The peak figure (10,100 lb) sits in half-ton plus / heavy-duty truck territory.

The table below lists every trim of the 2010 Toyota Tundra Regular CAB with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

How to interpret the headline tow figure

Ratings in this range are typically achievable with a weight-distributing hitch and the appropriate tow package. The conventional bumper-pull rating without weight distribution will be lower than the headline figure shown here — usually 5,000 to 8,000 lb. Confirm the hitch class on your vehicle's door-jamb sticker before towing at the upper end.

How this year compares to 2009

The 2009 Toyota Tundra Regular CAB carried a maximum tow rating of 10,100 lb. The 2010 model carries the same headline figure — manufacturers usually leave the rating alone year-over-year unless there's a powertrain or hitch change. See the 2009 Toyota Tundra Regular CAB page for the full per-trim breakdown of the prior year.

Other 2010 Toyota models

The rest of Toyota's 2010 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.