2013 Dodge Ram 2500 Crew Cab LB 4WD towing capacity

The 2013 Dodge Ram 2500 Crew Cab LB 4WD is published in 7 configurations, with tow ratings ranging from 9,600 to 14,600 lb depending on cab, bed, drivetrain, and hitch class. The peak figure (14,600 lb) sits in half-ton plus / heavy-duty truck territory.

The table below lists every trim of the 2013 Dodge Ram 2500 Crew Cab LB 4WD with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

How to interpret the headline tow figure

Ratings in this range are typically achievable with a weight-distributing hitch and the appropriate tow package. The conventional bumper-pull rating without weight distribution will be lower than the headline figure shown here — usually 5,000 to 8,000 lb. Confirm the hitch class on your vehicle's door-jamb sticker before towing at the upper end.

How this year compares to 2012

The 2012 Dodge Ram 2500 Crew Cab LB 4WD carried a maximum tow rating of 14,600 lb. The 2013 model carries the same headline figure — manufacturers usually leave the rating alone year-over-year unless there's a powertrain or hitch change. See the 2012 Dodge Ram 2500 Crew Cab LB 4WD page for the full per-trim breakdown of the prior year.

Other 2013 Dodge models

The rest of Dodge's 2013 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.