2008 Chrysler Sebring towing capacity

The 2008 Chrysler Sebring is published in 5 configurations with a tow rating of 1,000 lb (very light towing only).

The table below lists every trim of the 2008 Chrysler Sebring with the engine, drivetrain, axle ratio, horsepower, torque, GVWR, curb weight, and payload that go with that trim's headline tow rating. Manufacturers often publish more than one tow figure per truck — a conventional bumper-hitch rating, a weight-distributing rating, and a gooseneck or fifth-wheel rating — so the highest number here is the maximum across all hitch classes the source carries for the trim.

Per-trim breakdown

How to interpret the headline tow figure

Tow ratings at this level are normally achievable with a conventional Class II or Class III receiver hitch. Always verify your vehicle has the manufacturer's tow package installed if you intend to tow at the upper end of the rating, and inspect the door-jamb sticker for the actual maximum permitted on your specific configuration.

How this year compares to 2007

The 2007 Chrysler Sebring carried a maximum tow rating of 2,000 lb. The 2008 model is rated 1,000 lb lower — sometimes a real spec change, sometimes a re-test under a stricter standard like SAE J2807. See the 2007 Chrysler Sebring page for the full per-trim breakdown of the prior year.

Other 2008 Chrysler models

The rest of Chrysler's 2008 lineup, ranked by maximum tow rating. Click through for the per-trim breakdown of any of these.

All figures sourced from manufacturer documentation. See our methodology for how the dataset is compiled. Always confirm against your vehicle's door-jamb sticker before towing.